Views: 11,038
Duration: 34 seconds

Animated assembly of a GM Corvette Engine. www.smallblockscreensaver.com

Views: 613,095
Duration: 03:03

My mix&edit of this fabulous footage full of breath-taking driving on tarmac roads. And behind the wheel of this little FWD tarmac beast we have the French rally legend Jean Ragnotti, a true magician on tarmac.

Views: 29,099
Duration: 08:01

Check out this video with additional footage. After fluids are drained from vehicles, auto salvage yards, pick n pull yards, and self service salvage yards use this high speed SAS FORKS SCORPION ENGINE PULLER to pull engines and transmissions from scrap cars. Generating more revenue from their scrap steel and aluminum. To buy one, Email: paul@sasforks.com or call USA 920-845-2497 Visit our web site www.sasforks.com

Views: 20,105
Duration: 05:12

--- www.aluweld.de --- 10200cc M14P Radial engine inserted in a Goggomobil.

Views: 31,710
Duration: 03:43

Views: 8,543
Duration: 54 seconds

Steam injected into the manifold increases engine vacuum and torque, RPMs rise faster and the engine is de coked and cleaned internally, also the exhaust gas vanishes? I am unable to explain why this happens, there are thousands of patents for steam injection systems yet I have never seen one on a car, why not? my fuel logs show a 14% increase in efficiency so far. Any comments and suggestion are welcome to try and explain this phenomena.

Views: 14,498
Duration: 07:16

Most of the engines now-a-days use Electronic Fuel Injection (EFI) system for better combustion, fuel economy and emission control. But old carburetors are still there in some engines.

Views: 130,803
Duration: 07:43

When cleaning a car engine, any all-purpose cleaner or degreaser will work, and it can be very helpful to have access to a pressure washer. Learn to be generous when using degreaser on a car engine with help from car restoration specialists in this free video on car maintenance. Expert: Gary Malec & John Grassi Bio: Gary Malec and John Grassi rebuild cars and boats, do household handyman work, and build computers. Filmmaker: gary malec

Views: 103,475
Duration: 01:38

This segment is from automotive author Jim Richardson's video, "How To Port Cylinder Heads for More Power." Here Jim describes how to do port matching. To view the entire video, order for 19.95+shipping at www.ccgtvonline.com

Views: 51,258
Duration: 04:27

Guy Negre of MDI Air Car engine that runs on compressed air. Emissions are only filtered air that's cleaner than outside air. 300 bars of pressure in carbon-fibre & kevlar air tanks. Car can travel at 110 km/hr and has a 150 km driving range. Refilling can be done by plugging in at home or at a special high-pressure air station. Dual-energy models use small amounts of bio-fuels that can extend the range to over 1400 kms. Pollution free vehicle that produces zero emissions. When the car stops at traffic lights, the engine stops so no energy is lost because there's no idling. Go to www.catvolution.com for more information. There are many more 2008 New York Auto Show videos with MDI's...

Views: 21,534
Duration: 08:53

A rotary engine runs on compressed air. Part 2 of 2. See the first part at www.youtube.com See also www.engineair.com.au

Views: 360,787
Duration: 03:27

Nizpro 1000hp XR6 Turbo Engine. Australian Car, Australian Company. 1000hp 4.0ltr 6cyl Ford.

Views: 2,131,918
Duration: 04:11

This is rare footage of the world's first car's engine igniting & running. From Wikipedia: After developing a successful gas-powered two-stroke piston engine in 1873, Karl Benz focused on developing a motorized vehicle. His Patent Motorwagen (or Motor Car), introduced in 1886, is widely regarded as the first purpose-built automobile, that is a vehicle designed from the ground up to be motorized. Benz unveiled it officially on July 3, 1886 on the Ringstraße in Mannheim, Germany. The vehicle was patented with German patent number 37435, which Benz applied for on January 29, 1886.

Views: 81,622
Duration: 02:36

After reinstalling a car's timing belt and water pump, timing an engine is done to make sure the mechanical alignment is correct between the camshafts and crankshaft. Learn how to time an engine with tips from a certified auto mechanic in this free video on car engine repairs. Expert: Nathan McCullough Bio: Nathan McCullough graduated from Nashville Auto-Diesel College with a GPA of 3.5 and received their Craftsmanship Award and Honor Seal. Filmmaker: Robert Rogers

Views: 51,999
Duration: 04:49